Description

Pure studio sound for instruments and vocals.

The LCT 440 PURE is a bestselling studio microphone with high-end specifications. Its Record-ready sound ensures that your instrument and vocal recordings will immediately fit well into the mix. That’s why you’ll find LEWITT microphones in iconic studios around the world.
The LEWITT LCT 440 PURE stereo pair includes two perfectly matched large diaphragm condenser microphones with studio-quality sound for instruments and vocals, and all accessories needed for better stereo and vocal recording.
Record vocals with perfect clarity.
Set up one LCT 440 PURE with a shock mount and magnetic pop filter, and you are ready to create professional vocal recordings. Your vocals will sound fantastic from the start. Voiceovers and podcasts get perfect clarity.
Perfectly matched pairs.
First, LEWITT’s advanced measurement and calibration system ensures that the sensitivity is the same for all LCT 440 PURE produced. An algorithm then compares all measured frequency responses and puts together perfectly matched pairs. Those get packed and sent to you.
Everything you need.
The LCT 440 PURE stereo pair comes in a sturdy mil-spec transport case with space for all included accessories. Use it for outdoor recordings, safe storing, or touring. Wherever you go, your microphones will be protected.

Features

Perfectly matched stereo pair
1″ true condenser studio microphone
For instruments and vocals
High-end specifications
Cardioid polar pattern

Included

– 2x LCT 440 PURE recording microphones
– 2x Shock mounts
– 2x Microphone mounts
– 2x Windscreens
– 2x Magnetic pop filter
– 1x Stereo bar
– 1x Transport bag
– 1x Mil-spec transport case

Specifications

Type: Condenser, externally polarized
Acoustical operating principle: Pressure gradient transducer
Diaphragm: 3 micron gold sputtered Mylar
Transducer : 25.4 mm, 1 in
Polar pattern: Cardioid
Frequency range: 20 to 20,000 Hz
Sensitivity: 27.4 mV/Pa, -31.2 dBV/Pa
Self-noise: 7 dB (A)
Max. SPL for 0.5 % THD: 140 dBSPL
Signal / noise ratio: 87 dB (A)
Dynamic range: 133 dB (A)
Supply voltage: 48 V +/- 4 V
Current consumption: 2.63 mA
Internal impedance: 110
Connector: Gold plated 3-pin XLR
Microphone enclosure: Zinc die cast
Microphone dimensions: 138 x 52 x 36 mm (5.43 x 2.04 x 1.42 in)
Microphone net weight: 310 g (10.9 oz)